Intrinsyc released it’s Open-Q™ 212 SBC, a full-featured, low-cost IoT computer based on a powerful quad-core ARM Cortex A7 (32-bit) 1.267GHz processor, with integrated GPU and DSP. This single board computer has some nice features such as Wifi, Bluetooth, LCD 720p support, HDMI 720p H.264/H.265 playback, an 8MP camera, four microphone inputs and amplified stereo outputs. It also features 4x USB ports, ethernet, serial interface, RTC clock and Li-Ion battery support. The board is ideal for creating voice controlled devices with noise cancellation technology and other internet enabled projects. The board can be used as a development kit or be embedded on final product. On the software side it supports Android 7 and there is a call for Linux support. This board packs some great features and looks promising in the IoT world. [via]
“We expect our Clients to use the board first as a development kit and then subsequently as an embedded SBC in their final product. It’s also likely that some Clients would want to de-feature or de-populate the SBC to lower the cost or to fit in a particular enclosure. Our team has the experience in hardware, software and mechanical engineering, we can quickly take the SBC’s core technology as is, and adjust the peripheral set. It’s our Client’s choice on how to proceed.” Said Intrinsyc.
Open-Q™ 212 SBC Specifications:
Processor
• Quad-Core ARM Cortex A7 (32-bit) 1.267GHz, GPU, DSP
Memory/Storage
• 1GB LPDDR3 RAM
• 8GB eMCP Flash
• MicroSD card socket
Wireless
• Pre-scanned Wi-Fi 802.11n 2.4Ghz, with chip antenna and U.FL antenna connector
• Bluetooth 4.1 + BLE
LCD/Display
• Up to 720p LCD or up to 720p HDMI Type A
Camera
• Up to 8MP over 2-lane MIPI CSI
Video
• 720p@30fps playback
• Up to 720p playback with H.264 (AVC) and H.265 (HEVC)
• Up to 720p H.264 (AVC) capture
Audio
• 4x microphone inputs
• 2x amplified speaker outputs
• 2x stereo line outputs
Power
• PMIC and Li-Ion battery support
I/O
• 4x USB 2.0 Type A host mode, Ethernet, Serial, RTC, I2S, GPIO, sensor header
OS Support
• Android 7 Nougat, Call for Linux
Operating Environment
• Input 12V/3A or single-cell Li-Ion battery
• Operating Temperature 0° C to +70°C
• Nano-ITX 120mm x 120mm
Open-Q™ 212 Single Board Computer for your IoT Device – [Link]
This content was originally published here.
